PO-ApK — Automated Touch Execution for Android
PO-ApK combines the local prediction engine, browser data bridge and Remote Touch controller into one Android application.

The app monitors the configured market information, generates a TECHNICAL UP or DOWN signal and activates the calibrated position on the screen. It is designed to reproduce a human finger press with consistent timing while keeping all processing locally on the Android device.
How PO-ApK works
The complete process runs as follows:
1. Pocket Option runs in the phone’s browser.
2. The Tampermonkey bridge reads the available price, payout and account-balance information.
3. Data is delivered securely to PO-ApK through the phone’s private local address: 127.0.0.1:3111.
4. The embedded TECHNICAL engine analyzes the configured PRICE or CANDLE information.
5. PO-ApK generates an UP or DOWN direction.
6. Remote Touch presses the calibrated screen position automatically.
7. Payout protection, balance protection, pause controls and work/break timing remain active throughout operation.
The local service is protected by a randomly generated authentication token. Prediction history and settings are stored privately on the device.
First-time setup
1. Install PO-ApK
Install the signed PO-ApK release on the Android phone or tablet.

Open the application and verify that the embedded local engine shows:

LOCAL ENGINE RUNNING
2. Configure Tampermonkey
Install the compatible Tampermonkey script in the supported browser.

Inside PO-ApK:
1. Open the Embedded APK-PO section.
2. Press COPY TOKEN.
3. Open the Tampermonkey script menu.
4. Select the option for setting the PO-ApK authentication token.
5. Paste and save the token.
The token must match the PO-ApK installation on that device.
3. Grant Android permissions
Complete the two one-time permissions:
- Enable Display over other apps for PO-ApK.
- Enable the PO-ApK Accessibility Service.
Overlay permission allows PO-ApK to display its controller and transparent touch targets above the browser. Accessibility permission allows it to perform the calibrated UP and DOWN touches.
4. Open Pocket Option
Set the browser page to:

https://pocketoption.com/

Log in to the appropriate demo account and select the required asset, entry amount and expiration time.

Always begin testing with the demo account.
Calibrating UP and DOWN
Correct calibration is essential.
1. Open Pocket Option and make sure its UP and DOWN buttons are visible.
2. Return to PO-ApK and press CALIBRATE UP / DOWN.
3. Transparent touch targets will appear over the browser.
4. Drag the green UP target to the exact center of the browser’s UP or BUY button.
5. Drag the red DOWN target to the exact center of the DOWN or SELL button.
6. If secondary DOWN is enabled, position its additional target as required.
7. Leave calibration mode and perform several demo tests.
Calibration is stored locally for the device and screen orientation. Recalibrate whenever you change:
- Phone or tablet
- Browser
- Screen orientation
- Display resolution or scaling
- Pocket Option layout
- Full-screen mode
- Browser zoom level
Prediction settings
PRICE mode
PRICE compares the current price with the price recorded at the selected observation age.
- Current price above the reference price produces UP.
- Current price below the reference price produces DOWN.
CANDLE mode
CANDLE compares the current price with the opening price of the active one-minute candle.
- A green candle produces UP.
- A red candle produces DOWN.
Entry cycle
The entry cycle determines how frequently the engine is allowed to create a new signal.

A value of 0 ms enables immediate tick-driven operation.
Price observation
The observation value determines how far back the PRICE mode looks when selecting its reference price.

A value of 0 ms compares the current price with the newest available previous tick.
Execution delay
The execution delay postpones publication of the generated direction.

Available values range from 0 ms to 5000 ms. The correct value depends on the browser, device performance, network conditions and intended entry timing.

All timing parameters should be calibrated using demo results rather than assumptions.
Safety and control features
PO-ApK includes:
- REAL and DEMO balance monitoring
- Live payout monitoring
- Minimum payout protection
- Minimum REAL balance protection
- Manual pause and resume
- Work/break timing
- Secondary DOWN execution
- Rapid UP/DOWN touch mode
- Screen-awake operation
- Encrypted authentication token
- Private prediction history
- Local-only processing interface
- Individually calibrated UP and DOWN positions
Starting automated operation
Before pressing ON, confirm:
- The correct account is active.
- Pocket Option is open and visible.
- The asset and expiration are correct.
- Tampermonkey is reporting current information.
- PRICE or CANDLE mode is selected.
- Entry, observation and delay settings are saved.
- UP and DOWN positions are calibrated.
- Payout and balance protection are configured.
- Several demo touches have been verified.
Press ON to begin. Use PAUSE whenever automatic touches should temporarily stop, and press OFF to stop the controller.